Gypsum Cement

Purchase

Price: $35.95
HAVE A QUESTION?
You will earn 179 Reward Points by purchasing this product.

Description

We stock the two most poplular Cements for moldmaking.

WHITE HYDROCAL:

HYDROCAL® White Gypsum Cement. This is a good choice for mask latex molds. It is harder than #1 Pottery Plaster and will hold detail longer with repeated castings. A good selection for decreasing production time on masks. Also works well for quick mother molds. (Please note: This product is not for lifecasting of body parts.) WARNING This product is for making molds of clay and industrial patterns only. When mixed with water, Hydro Cal hardens and then becomes very hot. DO NOT attempt to make a mold enclosing any part of the body using this material. Failure to follow these instructions can cause severe chemical burns that may require surgical removal of affected tissue. Read MSDS precautions thoroughly before using. Dust from this product may cause eye, skin, nose, throat, or respiratory irritation. Use eye, skin, and respiratory protection in accordance with good industrial hygiene practices. Read MSDS of product thoroughly before using for specific details. Product safety information: 800-507-8899.

THIS PRODUCT IS FOR PROFESSIONAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.

MIX RATIO: The manufacture recommended mix-ratio of White Hydro Cal is: 45 parts water to 100 parts Hydro Cal by weight. The average setup time is 25-35 minutes when manually mixed. Please note that parts can be in grams, ounces or pounds etc.


ULTRA CAL 30:

A very low expansion, gypsum cement used widely in the SPFX industry. Makes hard, super strong precise molds. Ideal for foam latex molds, where durability and detail reproduction are a concern. Can be heated in an oven. (Please note that this product is not for use on skin and is NOT a life casting material. FOR PROFESSIONAL USE ONLY!

WARNING This product is for making molds of industrial patterns only. When mixed with water, Ultra Cal undergoes a chemical reaction which causes it to harden and then slowly become very hot and highly alkaline (corrosive to skin like drain cleaner.) If mixed incorrectly this process can happen very rapidly. DO NOT attempt to make a mold enclosing any part of the body using this material. Failure to follow these instructions can cause severe chemical burns that may require surgical removal of affected tissue. Dust from products may cause eye, skin, nose, throat, or respiratory irritation. Use eye, skin, and respiratory protection in accordance with good industrial hygiene practices. Read MSDS of product for specific details. Product safety information: 800-507-8899.

THIS PRODUCT IS FOR PROFESSIONAL USE ONLY. KEEP OUT OF REACH OF CHILDREN.

MIX RATIO: The manufacture recommended mix-ratio of Ultra Cal 30 is: 38 parts water to 100 parts Ultra Cal 30 by weight. The average setup time is 25-35 minutes when manually mixed. Please note that parts can be in grams, ounces or pounds etc. Do not mix with your hands, A paint paddle or jiffy mixer is recommended.

Product Reviews

Login or Register to write the first review.

You may also like...

Copyright 2017 The Monster Makers, Inc.. All Rights Reserved. Site Map | Terms + Conditions | Privacy Policy

E-Commerce Development by Ryan Design Studio